Oxygen Compressor Agency | Oxygen Compressor Seller

The working principle of oxygen compressor:

Oxygen in the air accounts for 20%, nitrogen accounts for nearly 80%, and the rest are rare gases. The oxygen generator is actually a compressor, equipped with special accessories such as molecular sieves. When working, the oxygen machine compresses and cools the air to a liquid state, and uses the different vaporization temperatures of liquid oxygen and liquid nitrogen and molecular sieves to separate them, which makes liquid oxygen, which can be bottled and sold. The by-product is nitrogen.

Advantages of Oxygen Compressors | Turbo Compressors:

• The exhaust volume is large, the exhaust is uniform, and the airflow has no pulse
• High speed
• No need for lubricating oil in the machine
• No pulse
• It has a flat performance curve and a wide operating range
• Easy to realize automation and large-scale
• Fewer wearing parts, less maintenance, and long operation cycle

When using an oxygen compressor, pay attention to:

• Compressed gas components are strictly prohibited from contacting with oil. The cylinder is lubricated with water and glycerin without oil or oil-free lubrication. Do not allow oil to be stained during maintenance. It must be cleaned and dried with solvent before assembly;
• Due to the high humidity when lubricated with water, the temperature rises again during compression, and the oxygen from the wet gas cabinet is corrosive, so the materials in contact with oxygen must be resistant to corrosion, and require good thermal conductivity and electrical conductivity. The cylinder is generally made of phosphor bronze, the piston is made of aluminum alloy, and the intercooler is made of copper pipe or stainless steel pipe;
• The average speed of the piston should be low, and the gas speed in the pipeline should also be lower than that in the air compressor;
• The exhaust temperature should not be too high, not higher than 100~12°C when lubricating with water, and not higher than 160°C when using oil-free lubricating structure filled with polytetrafluoroethylene. The pressure ratio of each stage should not be too high.

Oxygen Compressor | Piston Compressor Advantages:

• Applicable to a wide range of pressures, the piston compressor can be designed into low pressure, medium pressure, high pressure and ultra-high pressure, and at the same speed, when the exhaust pressure fluctuates, the displacement of the piston compressor basically remains unchanged.
• The compression efficiency is high. The process of compressing gas by the piston compressor is a closed system, and its compression efficiency is high.
• Strong adaptability, the piston compressor has a wide range of displacement, and the effect of gas density on the performance of the compressor is not as significant as that of the speed compressor. The piston compressor of the same specification can often be suitable for compressing other compressors with a little modification. gas medium.